Ratings:
From the original Biznopedia business directory (2008–2014), preserved at its original address. Explore the new Biznopedia for current data on 208 million companies across 11 registries.
Flushing Instructions Included In Outboard Manual |
| Date Added: August 26, 2010 09:01:44 AM |
| Author: jetskimanual |
| Category: |
| Most new Outboard engines have the flushing port as typical equipment. However majority of us don't really understand the difference between the flushing ports of the different Outboard engines. Here, I will give you 3 engine examples. The Honda Outboard manual states: "Thoroughly clean and flush the outboard motor with fresh water after operation in dirty water or salt water." Honda recommends making use of the flush port connector on the side of the engine for flushing and the emergency-stop switch clip be removed so there is no possibility of the engine starting while you're near the propeller. The Honda flushing directions are easy. First remove the port connector, then attach the garden hose to the flush port connector, turn the water on and let it flow through the engine for 10 minutes at the least. After you flushed the engine, remove the garden hose and reconnect the port connector. For Suzuki Outboard owners, there are two methods to flush your engine. First, procure an ear-muff style flusher and second, make use of the flush-plug adaptor on the tail of the engine cowling. With the ear-muff style flusher, Suzuki suggests turning the garden hose on to get enough water to flow so that plenty of excess water flows out from around the rubber cups. It's best to remove the propeller before turning on the engine at idle speed for several minutes and then turn the engine off and disconnect the hose and flusher. With the flush-plug adaptor, simply disconnect it and install the garden hose into that port and turn the water on. You don't have to start the engine but simply let the water flow for at least five minutes. Detach the hose and attach the plug when you're finished. It's easier and safer than making use of the first method. The flushing instruction of Yamaha Outboard states: "Perform this procedure right after operation for the most thorough flushing." and "after shutting off the engine, unscrew the garden hose connector from the fitting on the bottom cowling." Connect the garden hose, turn on the water, and let it flow for 15 minutes. The Yamaha Outboard manual gives a warning: "CAUTION: Do not perform this procedure while the engine is running. The water pump may be damaged and severe damage from overheating can result." To thoroughly understand your Outboard engine including its flushing instructions, take time to read your owner's manual if you still have it. If you don't, then you could always find a replacement online or with your local dealer. You'll be shocked of the many things you haven't known about your beloved Outboard machine. Jay Westercamp is the CEO of The Manual Store and the company is dedicated to ATV, Boat, Jet Ski, Motorcycle, and Snowmobile enthusiasts. Their repair manuals are the best source of information to fix your vehicle. |
Bookmark this Article:          |
Ratings:
Average rating: ( votes)You must be to leave a rating.Average rating: ( votes) |